TOOLS & EQUIPMENT We carry a complete line of equipment necessary to start servicing shocks yourself. Look over the selection below and determine how in depth you want to get. From a simple oil change to re-valving, we have everything you will need to "do it yourself". Note: Purchase nitrogen tanks at a local welding supply outlet. 20-008 Starter Tool Kit This kit has all the tools you need to start doing shocks, excluding the nitrogen and tank. The kit includes: 1) 20-001 Nitrogen Charge Kit 2) 20-005 IFP Depth Tool 3) 398-00-042 Body Holding Tool 4) 398-00-050 1/2" Shaft Holding Tool 5) 398-00-026 1/2" Seal Protector 6) 20-007 Pik Set 7) 605-01-000 Video Can be upgraded with 803-00-034 Fox IFP Depth tool - Add $50.00 $388.95 20-001 Nitrogen Charge Kit Contains everything needed to connect to your nitrogen bottle and start charging shocks. Includes: 1) Regulator 2) Hose (5') 3) 20-002 Inflation Needle Assembly with Gauge $269.95 20-002 Fox Inflation Needle Assembly with Gauge This item connects to your regulator and hose. The unit has a pressure gauge to check for leaks. Complete with quick disconnect. $99.95 20-006 Nitrogen Regulator with Hose High pressure delivery regulator only with hose (no inflation needle). $177.95 802-01-000 Fox Replacement Nitrogen Safety Needle Replaces bent, damaged or broken needles. Complete Safety unit. $59.95 605-01-000 Video, Fox Shock Rebuilding Learn to repair Fox Shocks. Shows all steps in servicing Fox Shocks. $26.50 398-00-042 Clamp, Body Holding Tool Used to hold shock in vice for disassembly and service work. $32.75 20-011 Clamp. 2" Body ('03 Snow-Pro X-Link) $29.95 20-012 Clamp, Alum. Body ('03 & '04 ZR Sno-Pro, All Zero-X) $29.95 398-00-050 Clamp, Shaft Holding Tool, 1/2" Shaft Used to hold 1/2" diameter shaft while replacing eyelets. $19.50 398-00-051 Clamp, Shaft Holding Tool, 5/8" Shaft Used to hold 5/8" diameter shaft while replacing eyelets. $19.50 803-00-034 Fox IFP Depth Gauge Used when servicing Fox Shocks to set the Internal Floating Piston at the correct depth. Laser engraved measurements and red anodized. Genuine Fox part. $108.95 20-005 IFP Depth Gauge, Un-Calibrated Threaded depth tool. Same as the Fox tool (803-00-034) except no engravings or anodizing.  $52.50 20-004 IFP Depth Gauge, Thumb Screw Adjust Simple adjust, need caliper. $35.95 398-00-026 Seal Protector, 1/2" Shaft "Bullet Tool" used to install bearing cap over 1/2" shaft without damaging inner seals. $19.99 398-00-196 Seal Protector, 5/8" Shaft "Bullet Tool" used to install bearing cap over 5/8" shaft without damaging inner seals. $19.99 398-00-094 5/8" Seal Protector x1/2" ID For Zero-X and others w/1/2" shank. (Rebound adjust) $19.99 20-007 Extraction Kit (Pik Set) Brass tools used to remove old seals and O-Rings. $9.95 20-003 Drill Index Set #30 through #60 drill bits. Used to drill piston orifice for tuning. $49.95 398-00-007 Spanner Wrench Used to adjust spring pre-load on cam adjust Fox Shocks. Will also work on other aluminum nuts with ears. $7.75  80-001 1/4" Teflon Tape 1/4" narrow tape works excellent for small pipe fittings used on all Fox Shocks. $4.25 802-02-000 Nitrogen Filler, Schrader Valve (T-Handle) Use to fill shocks that use Schrader valves for nitrogen. $79.95 10-007 Shop Service Kit For the professional. The kit contains 20 of each O-Ring, seal and wiper for standard shocks. Like buying 20 of the 10-003 rebuild kits. $293.95 30-001 Beginner's Valving Kit Contains three of each valve.   803-01-008 Valving Kit, 3/8" ID Contains ten of each valve. $399.99 803-01-009 Valving Kit, 1/2" ID Use on Fox shocks with rebound adjust. Contains ten of each valve.   30-002 Deluxe Service Kit (5) of each valve, (6) 10-003 kits, (2) blank pistons, (4) bleed screws, (1) extraction kit (Pik Set), (1) 1/2" seal protector, (1) body holding tool, (1) 1/2" shaft holding tool. All these items come in a nice carrying case. $418.95 30-003 Deluxe Valving Kit Same as the 30-002 kit excluding the tools (extraction kit, seal protector, body and shaft holding tools). $367.50 30-004 Compression Damping Adjust Kit Add compression Adjust to your '02 Special edition Arctic Cats. Comes complete with Knob Assembly to install in your reservoir body. $134.95 20-010 PPS II Inner Body Removal Tool Use to pull inner body to change or add bands. Can be used to install as well $79.95